SY series pipe machine

SY Series Tube Machines

SY Series Tube Machines are ideal equipment for producing concrete tubes, now. it is reasonable in design, beautiful in appearance, reliable in performance and convenient in operating. Its quality is up to State Standards of GB11836-89.
With this series of machines, the concrete tubes with specifications of 200 -1000mm can be produced by using pulverized coal ash, slag, sands and crushed stone pulsing little quantity of cement. The tubes produced with this series machines are even in their wall thickness, smooth on surface, high in compression strength, convenient and firm in connection, and excellent in anti-seeping, which are widely used in agricultural irrigation and draining projects in cities.

Main Technical Parameters:

Power：22kw
Overall Size：2200×1600×4150mm
Vibration Frequency：max.1400r/m
Electrical source： 380V/50Hz
Total Mass：3000kg

Video: http://www.youtube.com/watch?v=TudAo3cE6VM

QMJ4-45 block making machine

QMJ4-45 BLOCK SHAPING MACHINE

This Machine is manufactured on the base of technical modifications to the original block shaping machines, that is, changing the former one-time-vibration into twice-vibrations of molding core, so, the block density becomes higher, shaping speed quicker and block strength more even, this model of machine can suitable to the customers who have any kinds of ceasing concrete working sites, and the consumption carriage can be reduced.

Main Technical Specifications:
Product Quantity：400×200×200 4 pieces/mould 2600 pcs/8h
400×150×200 5 pieces/mould 3000 pcs/8h
400×120×200 6 pieces/mould 3400pcs/8h
Power：7.4kw
Overall Size：1550×1335×1580mm
Cycle：45S
Vibration Frequency：max.2400r/m
Electrical source： 380V/50Hz
Total Mass：1200kg

Videos: http://www.youtube.com/watch?v=N9RdOMw-fuY

http://www.youtube.com/watch?v=A5tq_jpZBUQ

QT4-18A fully automatic block shaping machine

QT4-18A BLOCK SHAPING MACHINE
QT4-18 Block Forming Machine is completely controlled by PLC system. By operating its computer interfaces, the random signal analysis, fault diagnosis and parameter setting-up of all kinds of materials can be achieved, easily.
The material stock hopper and the material feeding hopper are separated, to each other, for the purpose of quantitative feed of materials, which can effectively control the advance liquidation of some concrete and reduce the feeding time.
Its unique material-feeding device can quickly and evenly discharge the materials into the molding box so that the weight error in finished products can be reduced to the minimum.
For its frame structure, super-strong shaped steel bars are used; for its electronic and hydraulic systems, most the important elements are imported. So, all of these have ensured the stability and reliability of the machine in long term of operation.
This machine has good applicability. It not only can be used for producing concrete blocks of high strength, but also for Pulverized Coal Ash bricks, Cinder Bricks, Mine Slag Blocks, and so on. Only by changing different moulds and dies, the hollow blocks and solid blocks of different specifications can be manufactured.

Main Technical Specifications:
Product Quantity：400×200×200 4 pieces/mould 6000 pcs/8h
400×150×200 6 pieces/mould 8000 pcs/8h
400×120×200 8 pieces/mould 11000pcs/8h
Power：29.4kw
Overall Size：3700×1620×2550mm
Cycle：18S
Carriage Size：900×550×35mm
Vibration Frequency：max.4000r/m
Electrical source： 380V/50Hz
Total Mass：6000kg

Video: http://www.youtube.com/watch?v=8cj80TbMuQ8

SY-7502 fully automatic hydraulic figure block ma

SY7502 Block machine

The machine uses 4 frame types and 4 locations, so it has large worktable, competitive price, simple operation, low labor intensity and high efficiency. It can produce every kinds of building blocks less than 600 x 400 x 200mm, especially suitable for producing original color or color paving bricks, grass planting bricks, adiabatic and heat preservative bricks, surrounding tee bricks, protective lop building blocks and ditch building blocks.
Technical parameters:
1) Biggest pressure: 1,500kN
2) A path: 250mm
3) Electrical engineering power: 7.7kW
4) Set a weight: 3,600kg
5) Features size: 2,390 x 2,390 x 2,550mm
6) Day yield: defend to bump the road 500 x 600mm, 800pcs
7) Road stone: 500 x 300mm, 1,100pcs
The video website: http://www.youtube.com/watch?v=MJ8XSvTgIEM

QMR2-45 portable block making machine

QMR2-45 BLOCK FORMING MACHINE
It is one kind of small sized block forming machine, which is developed by combining the advantage of many other block forming machines into one. For this machine spring buffer pressing device is adopted to reduce the wear-down to the machine .So it is quick in product forming , high in product density and strong in pressing power. After remolding people can stand on the brick .With this machine, consumption of materials can be reduced. It is an ideal choice for customer.
Rated power: 7.8Kw
Weight: 0.8T
Shaping circle: 45s
Carrier size: 850*450*40
Standard: GB/T8533-1998

The video: http://www.youtube.com/watch?v=UtsbHKrXUYs

SY-3000 hydraulic semi-automatic curb shaping mac

SY-3000 Hydraulic, fully automatic curb shaping machine

It is mainly used for producing all kinds of crash-against water-barrier curbs, grass planting bricks, slope protecting bricks and so on.
Features:
1) Has double step with direction post, pushing drawing die, elevator equipment,
Well-knit and complete function, rational design in hydraulic pressure and electric
control system
2) All the devices select best brands of products from abroad for use
3) Can make sure machine, electric, hydraulic safe operation
4) This machine is suitable for product prevent hitting building blocks, road beach
stone, protective slop building blocks
5) The largest processing size is 1,000 x 500 x 200mm
6) The production has correct sizes, clear point and high anti-pressure
Technical parameters:
1) Biggest pressure: 3,000kN
2) A path: 250mm x 2
3) Electrical engineering power: 22.7kW
4) Set a weight: 11,200kg/14,200kg
5) Size: 9,300 x 1,150 x 3,600 (9,300 x 1,150 x 3,650mm
6) Day yield: biggest
7) Length: 1,000mm
8) Road stone: 500pcs

Video: http://www.youtube.com/watch?v=tG8xzW-FM38

QTJ4-40 semi-automatic block making machine

QTJ4-40 BLOCK SHAPING MACHINE

The series of Block Shaping Machines, which meet the state standards of GBT8533-1998, are excellent in performance, high in efficiency, and lower in energy consumption. Since putting into the market, good economic profits and social benefits have been achieved. They are ideal equipment for high quality cement blocks. The products made by them can be piled up (3-5layers immediately after they are shaped.)
Characteristics:
Nine characteristics compared with clay brick:
1. Not using the clay as raw material to destroy any field.
2. Making use of three industrial wastes to change wastes into valuables.
3. Not using fire to bake blocks and not building kiln to save the energy sources and fields.
4. No chimney to protect the environment and avoid pollution.
5. Production process is simple, they can be made everywhere .
6. Low investment and achieving much faster results, customers can profit in half a year after investing.
7. The block can be produced all around the year.
8. Good looking, construction convenient, low-floor real jigsaw puzzle, and the high buildings do filler and cheap.
9. Technical criteria is better than those of red brick and green brick.

Characteristics:
The building block machine, through mould and by application of fly ash and other industrial waste, can produce color cart road bricks, lawn bricks, cavity bricks, perforated cellular brick, kerbed bricks, tree well bricks and water conservancy revetment bricks, which are widely used in the construction of municipal works, buildings, garden sand roads and its productivity is very high.

Main Technical Specifications:
Product Quantity：400×200×200 4 pieces/mould 2600 pcs/8h
400×150×200 5 pieces/mould 3200 pcs/8h
400×120×200 6 pieces/mould 3800pcs/8h
Power：9.6kw
Overall Size：1580×1100×2100mm
Cycle：40S
Carriage Size：850×470×35mm
Vibration Frequency：max.3000r/m
Electrical source： 380V/50Hz
Total Mass：1500kg
Its video is http://www.youtube.com/watch?v=JC9CXGiJz3A

QTJ4-40 semi-automatic block making machine

To know how to change its moulds , please kindly visit our website http://www.youtube.com/watch?v=wmZrmKtt1LY&feature=related , and more about our product welcome to log in http://www.youtube.com/user/amyxue200806 , i hope you like them, if you are interested in any one , just feel free to tell me please, my dear friend, i am here at your service. mail: emily200806@yahoo.cn , msn: emily200802@hotmail.com , tel: 0086-15318558805

QT6-15 fully automatic block forming machine

SPECIFICATION OF QT6-15 BLOCK SHAPING MACHINE

Characters: PLC intelligent control. Man-machine interface, control system equipped with complete logic control, production program, malfunction diagnosis system and remote control function. So it doesn’t need a professional person but only need a simple training to the operator.

Product scope: It produces various bricks/blocks including color-face bricks (layered material feeding), through-body tiles, dock linkage blocks, road curb bricks, sod bricks, hydraulic blocks hollow blocks, perforated bricks, and standard bricks etc.
Optional configuration:

1.Lift-slab Elevating Conveyor (block stacking machine):
According to the different type of bricks, the finished products will be moved from the discharge transmitter and pilled up automatically 3 to 8 layers by the elevating conveyor, and carried to the maintaining place by the fork lifter truck. It could reduce labor and ground.
2.Colour face material feeder (layered material feeding)
Equipped with color face material feeding device, it could make various color face bricks , through-body Environmental protection bricks, road curb rocks, hydraulic blocks and sod bricks and so on.

For QT6-15 Block Forming Machine, intelligence system of PLC is adopted to control, with man-machine interface and automatic diagnosis function. For the electro-hydraulic proportional valve is used in its vibrating system, the material-feeding with low frequency and the shape-vibrating with high frequency have been achieved. Its material distributing system mounted with multirow of stirring forkscan quickly and evenly discharge the materials into the molding box. Only by changing its moulds and dies, all kinds of blocks, standard bricks, cellular bricks, grass planting titles, etc. can be manufactured, with an annual production capacity of 50,000 cubic meters of standard brick. So, it is one kind of ideal equipment for producing wall materials of new type.

Main Technical Specifications:
Product Quantity：400×200×200 6 pieces/mould 11000 pcs/8h
400×150×200 8 pieces/mould 14200 pcs/8h
400×120×200 10 pieces/mould 18000 pcs/8h
Power：36.4kw
Overall Size：4400×1920×2550mm
Cycle：15-18S
Carriage Size：850×680×35mm
Vibration Frequency：max.4000r/m
Electrical source： 380V/50Hz
Total Mass：7000